INSTALLATION MANUAL
page
35
/ 40
3300039745 R11 000 04/735
14. APPENDICES
APPENDIX 1 : PP30 PIN-PAD ACCESSORY
PP30 PIN-PAD
4 navigation keys
F key
:
FUNCTION key
Red key
: CANCEL key
Yellow key
: CORRECT key
Green key
: VALIDATE key
Installing the shield:
To install the shield, clip the 4 embossed lugs into the corresponding 4 recesses.
Position the shield in front of the PINPAD.
To make for easier insertion,
slightly squeeze on the tops
of the side panels.
Gently push the shield until it clips into the 4
points.
Two embossed
lugs on either side
of the shield (on
the inside)
Two recesses on
either side of the
PINPAD
Opening/disassembly of the terminal
Any attempt to open or disassemble the terminal will render it unusable.
Be careful not to disassemble the terminal.
Physical Characteristics
Mass
:
approximately 185 g
Dimensions
:
approximately 159 x 90 x 73 mm (L x l x h)
Cable length
:
approximately 1,1 m
Operating conditions
Ambient temperature
:
from +5°C to +45°C
Max relative humidity.
:
85% at +40°C
Storage conditions
Storage temperature
:
-20°C,
+65°C
Max relative humidity
:
95% at +55°C
Summary of Contents for EFTsmart
Page 1: ...Guide installation EFT Smart...
Page 2: ...260536567 3300039745 R11 000 04 735 NOTICE D INSTALLATION INSTALLATION MANUAL EFTsmart...
Page 21: ...NOTICE D INSTALLATION page 20 40 3300039745 R11 000 04 735 Notes...
Page 40: ...INSTALLATION MANUAL page 39 40 3300039745 R11 000 04 735 Notes...