8
Assembly
BEFORE FIRST USE
•
Before using your extractor for the first
time, remove any packaging material and
promotional labels.
•
Be careful when handling the blades as they
are extremely sharp.
•
Wash the tumblers, lids, blade assembly and
attachments in warm soapy water with a soft
cloth. Rinse and dry thoroughly. All parts
(except motor base) may be washed in the
dishwasher, on the top shelf.
•
When first using your blender, you may
notice an odour coming from the motor.
This is normal and will dissipate with use.
ASSEMBLY
1. Remove blades and position the cup with
opening facing up.
2. Add ingredients avoiding filling past the
MAX line.
3. Fix the blade assembly in place with a
quarter turn in the clockwise direction.
Ensure the blade assembly collar is securely
in place before inverting the cup to blend.
Functions
OPERATION
•
The blender will only work when the blades
and cup are correctly assembled. This
engages the safety interlock, and allows the
motor to run.
•
When the cup and blade assembly is
correctly assembled with ingredients inside,
invert cup, and place onto the motor base
using the alignment graphics.
•
To blend, securely hold the cup assembly
and twist clockwise on the base to the
ON position.
•
When the desired consistency is reached,
turn tumbler anti-clockwise to release and
disengage the motor.
•
Do not blend continuously for more than
60 seconds at a time. Allow the motor to rest
for 2 minutes before continuing.
•
Ingredients can be pulsed by rotating the cup
within the bayonet positions, which will turn
the motor on and off.
•
When finished blending, wait a few seconds
for the blades to stop spinning before lifting
the jar assembly off the motor base.
•
Invert the cup and allow the ingredients to
run off the blades for a few seconds before
unscrewing blades. Hold by the blade collar,
and turn anti-clockwise to remove.
•
For safety, turn the motor base off at the wall
and unplug when finished blending.
