9
EN
Assembly
BEFORE FIRST USE
Machine Preparation
Remove and discard all labels and packaging
materials attached to your espresso machine.
Ensure you have removed all parts and
accessories before discarding the packaging.
Remove the packaging and the plastics
bags containing the water filter and water
filter holder.
Clean the water tank, portafilter, filter baskets,
milk jug and drip tray using warm water and a
gentle dish washing liquid. Rinse well, then dry
thoroughly before reassembling.
INSTALLING THE WATER FILTER
• Remove the water filter and water filter holder
from the packaging.
• Set the reminder for the next month of
replacement. We recommend to replace
the filter after 3 months.
• Soak the filter in cold water for 5 minutes.
• Wash the filter holder with cold water.
• Insert the filter into the two parts of the filter
holder. Ensure they are connected.
• Remove the water tank from the machine.
Align the base of the filter holder with the
adapter inside the water tank. Push down
to lock into place.
• Fill the water tank with cold potable water and
reattached the machine, ensuring it is properly
attached and sitting flush to the back of the
machine.
• Refer to ‘Care & Cleaning on page 18 for further
instructions.
NOTE
DO NOT use highly filtered, demineralised or
distilled water in this machine. This may affect
the taste of the coffee.
NOTE
For replacement water filters, visit the Sage
webpage or contact Sage Customer Service.
FILLING THE WATER TANK
• Ensure the water filter is securely fitted
inside the water tank.
• Use the handle at the top of the water tank to assist
in lifting it up and away from the machine.
Refer to Instruction Book for more information.
Contact the Breville Customer Service Centre
for further assistance.
AUS 1300 139 798
NZ 0800 273 845
www.Breville.com.au
INSTALL
WATER
FILTER
2
Rinse filter and
mesh
2
4
3
6
Replace water tank
Assemble
Set date + 2 months
Install filter in tank
5
Soak for
5 minutes
Replace water filter
every 2 months or
60 tank refills
1
MAX
MIN
MAX
MIN
MAX
MIN
• Fill the water tank with cold potable tap
water to below the MAX marking indicated
on the side of the water tank.
• Replace the water tank back on the machine,
pressing down to ensure that it is properly
positioned and attached to the machine.
Refer to Instruction Book for more information.
Contact the Breville Customer Service Centre
for further assistance.
AUS 1300 139 798
NZ 0800 273 845
www.Breville.com.au
INSTALL
WATER
FILTER
2
Rinse filter and
mesh
2
4
3
6
Replace water tank
Assemble
Set date + 2 months
Install filter in tank
5
Soak for
5 minutes
Replace water filter
every 2 months or
60 tank refills
1
MAX
MIN
MAX
MIN
MAX
MIN
NOTE
Replace the water daily. The water tank should be
filled with fresh, cold tap water before each use.
