background image

11

EN

The maximum amount of ice cubes  

the blender can blend without liquid  

in the jug at any one time is 1 standard  

ice tray or 250g.
Auto Clean
Use to remove most of the ingredients  

off the blender walls and blades. Add  

2 cups warm soapy water and press the 

clean button. For harder to clean, sticky 

or thick ingredients, add ½ teaspoon of 

dishwashing detergent for extra cleaning 

power. For best results, clean the blender 

jug this way immediately after use. The 

Auto Clean function only cleans the 

blender jug. It doesn't clean the juicer.

MANUAL OPERATION

SPEED CONTROL DIAL

Blending 
Turn the Speed Control Dial clockwise  

to select one of 10 speed settings  

from a slow STIR through to a very  

fast PULVERIZE. The timer will start  

to count up, and blending will stop  

when it reaches '2:00'.
Blending can be paused by pressing 

pause button. Press pause button again 

to cancel, or turn dial to resume blending 

from Speed 1.  

To stop blending, turn the Speed Control 

Dial anticlockwise back to READY or press 

ON|OFF button.

JUICING

Wash your selection of fruit and vegetables 

to be juiced. Most fruit and vegetables 

such as apples, carrots and cucumbers 

will not need to be cut or trimmed to size 

as these will fit whole into the feed chute. 

Ensure vegetables such as beets, carrots 

etc. have all soil removed, are washed well 

and trimmed of leaves before using. 
1.  Plug the power cord into your 

220–240V power outlet. 

IMPORTANT

Do not load feed chute with produce 

before the Juicer has reached the  

selected speed. 
2.   Turning the Juicer On 

Turn dial to desired speed setting. 

Use lower numbers (1–5) for soft fruits 

and vegetables and higher numbers 

(6–10) for hard fruits and vegetables. 

See Speed Selector Guide table on the 

next page to match speed and produce 

type for maximum yield. "Low" range, 

while it may not maximise yield of some 

produce, allows you to extract juice 

at a significantly lower noise level. 

3.   With the motor running, place food into 

the feed chute and use the food pusher 

to gently guide food down. To extract 

the maximum amount of juice, always 

push the food pusher down slowly.

4.   Full Blender Jug 

You can keep juicing until the jug  

is filled to max. level. 

WARNING

Never use fingers, hands or utensils to 

push food down the feed chute or to clear 

the feed chute. Always use the food pusher 

provided. 

 

CAUTION: 

sharp blades

The stainless steel filter basket contains 

small sharp blades to cut and process fruit 

and vegetables. Avoid touching the blades 

when handling the filter basket.

Summary of Contents for the 3X Bluicer Pro BJB815












Reviews: