7
EN
OPERATING YOUR NEW APPLIANCE
BEFORE FIRST USE
Remove any promotional material attached
to your kettle. It is recommended that before first
use, the kettle is filled to the maximum level with
cold tap water, boiled and water discarded.
OPERATION OF YOUR KETTLE
To fill the kettle, remove it from the power base
and open lid by pressing the lid release button.
Fill with the desired amount of water.
NOTE
Always fill the kettle between the minimum
(500ml) and maximum (1700ml) marks
on the water window.
Ensure the lid is locked firmly into place. Position
the kettle securely onto the power base. Insert
the power plug into a 230–240V power outlet
and switch on.
Press the ‘On / Off’ switch to the ‘On’ position
for water to boil.
NOTE
This kettle must only be used with the
power base supplied. Use caution when
pouring water from your kettle, as boiling
water will scald. Do not pour the water
too quickly.
The kettle will automatically switch ‘off’ once
the water has boiled.
If further heating of the kettle is not required,
switch ‘Off’ at the power outlet, unplug the
power cord and empty the water from the kettle.
Replace the kettle onto the power base and
close the lid.
SAFETY BOIL DRY PROTECTION
The kettle is fitted with a safety device, which
protects against overheating should the
appliance be operated with insufficient water.
If this occurs, the kettle will stop heating. Switch
‘Off’ at the power outlet and allow kettle to cool
before refilling. Remove the kettle from the
power base and add water. Return the kettle
to the power base. The safety device will then
automatically reset.
For additional safety, your kettle is fitted with
an additional thermal cut out. In the event of
overheating, the kettle will automatically shut
down to prevent further damage. Should this
occur, take your kettle to an authorised Sage
®
Service Centre.
Summary of Contents for Soft Top Pure SKE700
Page 42: ...42 MUISTIINPANOJA ...
Page 43: ...43 FI MUISTIINPANOJA ...
