background image

11

EN

Motor appears 

to stall when 

overload protection 

LED flashes

•  Wet pulp can build up under the juicer cover and stall the juicer if the juicer 

is used excessively without cleaning. If this occurs, disassemble and follow 

the cleaning instructions to clean the filter bowl surround, the stainless 

steel filter basket and the juicer cover. The juicer can also stall if excessive 

force is used to push produce down the feed chute. If this occurs, ensure 

that a more gentle pressure is used to push produce down the chute.

•  The juicer will automatically stop operating if too much food is being 

processed at one time. Try processing a smaller amount per batch. To 

continue juicing, reset the juicer by turning the juicer OFF and back ON.

•  Turn on the juicer before putting ingredients in the chute. Pressing 

ingredients down before the juicer reaches full speed can cause the motor 

to stall or overload. Use gentle to moderate pressure on the pusher. Lower 

pressure produces a better juice yield.

•  Hard fruit and vegetables will put excess strain onto the motor if a low 

speed is selected. Refer to the juicing guide to determine the correct speed 

for the fruit and vegetables selected for juicing.

Overload protection 

LED light flashing 

during the use

•  This indicates the motor speed is slowed down to an inefficient level.  

This may be caused by excessive pushing force on the pusher or too much 

pulp building up on the lid or in pulp pin. Use moderate pushing force on 

the food pusher and regularly clean the lid and pulp bin to ensure the juicer 

is operating at optimal speed. 

Overload Protection 

LED is on 

•  This indicates motor overload protection is activated. To reset the unit,  

turn the dial to OFF, unplug the juicer and let the motor cool down for  

25–30 minutes, then plug the juicer back in.

If any of the above issues persist, or if you have questions, stop use of the juicer and contact 

Sage

®

 Customer Service.

Summary of Contents for Nutri Juicer Cold Plus BJE530









Reviews: