Sage BCI600UK the Smart Scoop, Instruction Booklet

Page: 19 / 38

18
Care & CleanIng
Ensure that the ice cream machine is turned
off by pressing the POWER button. The
ice cream machine is off when the START
| PAUSE button ’s LED light is no longer
illuminating red. Remove the power plug
from the power outlet. Allow the ice cream
machine compressor to cool completely
before disassembling and cleaning.
CleanIng tHe StaInleSS
Steel HoUSIng
1.
Wipe the exterior of the stainless
steel housing and the LCD screen
with a soft damp cloth. Do not use
a dry paper towel or cloth to clean
the LCD screen, or use an abrasive
cleanser or metal scouring pad
to clean any part of the ice cream
machine as these will scratch
the surface.
note
Never immerse the stainless steel
housing in water or place in the
dishwasher. Take care not to allow
water or cleaning fluids to seep under
the buttons or LCD screen on the
control panel.
note
To clean the ice cream chamber
ensure that the unit is at room
temperature. Wipe out with soapy
water and a soft damp cloth.
2.
If over-spill of cream, milk, chocolate
etc. occurs in the interior chamber,
carefully remove using a soft,
damp cloth.
3.
Let all surfaces dry thoroughly prior
to inserting the power plug into a
power outlet.
CleanIng tHe lID
The lid can be cleaned in warm soapy water,
using a soft sponge. Do not use an abrasive
cleanser or metal scouring pad as these
will scratch the surface. Let all surfaces dry
thoroughly prior to placing into the ice
cream machine.
CleanIng tHe ICe Cream BoWl
Fill the ice cream bowl up halfway with
warm soapy water. A non-abrasive liquid
cleanser or mild spray solution may be used.
Allow to stand for 10-20 minutes.
note
Ice Cream Bowl is NOT dishwasher
safe.