EN
11
THE GRIND
Setting the Grind Size
FINER
GRIND SIZE
TURN
COARSER
GRIND SIZE
TURN
The grind size will affect the rate of water flow
through the coffee in the filter basket and the
flavour of the espresso. When setting the
grind size, it should be fine but not too fine
and powdery.
There are 25 settings on the GRIND SIZE dial.
To adjust the grind, rotate the dial to the back
of the machine to go finer, or rotate the dial
towards the front of the machine to go coarser.
The smaller the number, the finer the grind size.
The larger the number, the coarser the grind
size. We recommend you start at the No.16
setting and adjust as required.
NOTE
• When making changes to the grind size, the
new auto dosing time will be calculated after
your next tamp and updated for the dose cycle
following that.
• For most bean varieties, the grinder will
automatically switch off when the beans get
too low to complete a dose.
TIP
Changing the grind size affects the dose in the
portafilter. A finer grind size may cause an under
dose requiring “A Bit More”. A coarser grind size
may cause an over dose. To avoid an over dose,
press and hold the ‘Filter’ button for 3 seconds,
reducing the grind time by 3 seconds.
DOSING
• Ensure the bean hopper is locked on the machine
and filled with fresh coffee beans.
• Insert the filter basket required, into the portafilter.
• Press ‘Filter’ size button to select your filter size
(single or double).
FILTER
FILTER
OR
• Insert the portafilter securely into the dosing cradle.
• Press ‘Dose’ button to start grinding. The light
blinks until grind cycle is completed.
DOSE
NOTE
If the Dose button is not illuminated, check that
the portafilter is inserted securely in the cradle,
the bean hopper is locked in position and the
tamp lever is in the up-home position.
