Sage AFL IV, Operator'S Manual

Page: 59 / 70

AFL IV with Dynamometer
Sage Technologies, Inc. www.sageoiltools.com 59
Maintenance: AFL IV with Dynamometer
Charging the battery
The AFL IV with Dynamometer battery should be charged regularly after each day’s use, using
the wall-mount charger that accompanies the unit. Insert the round, yellow end of the charger cable over
the charger port on the AFL IV with Dynamometer front panel, and
tighten the black thumb ring. Then plug the other end of the charger
into a wall outlet.
The charger has been designed to work automatically with 110-
volt or 220-volt (50hz or 60 hz) voltage. Usually an overnight charge
will be sufficient.
Note: Keep the power switch in the off position during
charging.
Occasionally, a damaged battery will need to be replaced. (See
the following pages on battery replacement in this manual.) Prior to
replacing the battery, however, efforts should be made to charge the
unit with the accompanying battery charger for at least 24 hours.
When storing the AFL IV with Dynamometer, always make sure the power switch is turned
off, to avoid running down the battery.
Wallmount charger
connection