1
FCC Caution:
"Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment."
Warranty
Gain Electronic Co., Ltd. guarantees that this product meets its published specifications at the time of shipment from the
factory. Under proper installation it should work as expected.
Warranty Period
This equipment is warranted against defects in material and manufacturing for a period of one year from the date of
shipment. During the warranty period, GAIN is responsible for necessary repairs as long as the product can be proved to be
defective.
For warranty service or repair this product must be returned to a service facility designated by GAIN. Buyer will pay
shipping charges to GAIN while GAIN will pay return shipping charges.
Excluded Items
This warranty does not include consumptive parts such as batteries, fuses, buttons, relays. Also this warranty does not cover
defects caused by improper installation, improper or insufficient maintenance, unauthorized modification, improper
operation, ignorance of environmental specifications, or improper software or interfacing.
Remarks
No other warranty is expressed or implied, except for the above mentioned.
◎
The remedies provided herein are the buyer’s sole and e
◎
xclusive remedies. GAIN shall not be liable for any direct,
indirect, special, incidental or consequential damages.
Attention
◎
Never dismantle the equipment by any unauthorized personnel, or equipment may be damaged.
◎
After finishing operation of SAGA1-L12 radio controller shut off main power to the crane, power to receiver, and
remove transmitter key. If transmitter’s power is controlled by “rotary key switch”, then need turn the key to “OFF”
position and remove it.
◎
The crane should be equipped with main power relay, limit switch and other safety devices.
Precautions ( I )
To avoid any interference, the receiver must be placed as far as possible from frequency inverter and
power cable as possible.
Precaution ( II )
The receiver should be installed on the top of the electrical control box. Do not mount the receiver inside the electrical
control box.
Emergency
In case of Emergency, please follow the procedure below and contact the distributor for service immediately.
1. Press EMS button of transmitter.
2. Remove the key from transmitter.
3. Switch off the main power of crane.
4. Contact distributor nearest you immediately.