Specialized in developing,designing and manufacturing kinds of vinyl cutter
XP/YP
：
Don’t need to change.
Sensitivity
）：
Is based on the reflective intensity of paper to adjust, the reflective strength is
small value and he reflective weak is bigger value.
Fan setting:
ARMS machine use it ,can adjust the wind size of fan .
Additional setting in the display :
NO/Off (pause the plot)
Press this key to pause the current plot;you can then modify settings
performed previously.The display now shows the force and speed;both values
can be modified.
If you want to pause of cutting ,you can press the test key,wanted to end
work ,please press the reset key.
6.7cutting test
●Press the Test key to perform a cutting test.The cutting plotter will now cut a
square containing a triangle divided into four quadrants.
●The cutting test helps you verify the blade holder setting and cutting
pressure.The cutting test should give you clean and straight cuts in the loaded
media;there should be no damage to the backing
●If the test cuts through the backing,either the cutting force is too high,or blade
or blade holder setting is incorrect.Change these setting and repeat the cutting
test.
●You will also need to change the settings, in case of imprecise or too shallow
cuts.
