Ver. 1.0
You may also press the
button
on the left side of backboard and the screen will subsequently display
“
GOOD
” and “ SECURE”,then you can input the new personal code and press
“
#
”
to save your
operation.
Hotel Mode :
Be suitable especially for hotels use.
Press 1
– The user input his/her code and then press
LOCK(#)
to close the door ,a new code can be set up in
each time the door is opened.
Default Parameter
Please note “
＊＊
68 #
” cann’t work under HOTEL MODE.
SAGA
DATA DISPLAY OF HOTEL SAFE
NORMAL DATA DISPLAY
HI
:
indicates that the batteries are normal.
LO
:
indicates that the batteries are low
.
Test battery energy
When the door is closed,press the locking key “
#
”,and the battery energy test procedure will start.If the display
reads “
HI
”,it means the batteries are normal;if the display reads “
LO
”,it means the batteries are low and must be
replaced as soon as possible.
CLO
:
indicates that the locking bolts have extended.
OPEN
:
indicates the locking bolts are retracing.
DONE
:
indicates that you have successfully completed the operation.
NEW
:
indicates that you need to key in new digits right now.
ERROR DATA DISPLAY
when the following data appear on the display,it means an opeation error has occurred and you will need to
operate per the following instructions
:
HOLD
:
This data appear on the display after you have enter the incorrect code for four times in a succession.It
means the electronic code system is now locked out and that you will not be able to operate the keys until
the system unlocks itself in 15 minutes.
ERR
:
This data means you have swiped the credit card or entered the code incorrectly and you need to swipe the
card or enter the code correctly
.
ERR1
:
This data means the door fails to open as the bolts get stuck,In this case,give a push to the door to set free
the bolts before you perform the opening operation.
ERR2
:
This data indicates the bolts stud is being held (the door may be left unlatched) and locking bolts fail to
extend.In this case,give a push to the door until it firmly fit into place before you proceed with closing operation.
