SAFWAY Hunnebeck Safescreen, User Manual

Page: 126 / 156

126
Unless stated otherwise all dimensions are in mm
Assembly
6.10 Assembly­check­list
6.10.1 Assembly­service­provided­by­Hunnebeck­(project­specific)
The inspection includes a visual and a functional check of all components and of
assembled parts, according to relevant drawings. Checks must be done by the autho-
rized person only. At all stages, any deviations out from standard, must be highlighted
and corrected wherever possible, otherwise it must be reported to the senior staff
member who will take appropriate action.
Visual­Check:
q
- Completeness of all components.
q
- Deformation and wear of the parts.
q
- Mechanical damage.
q
- Corrosive damage.
q
- Cracks at welds and components.
Functional­Check:
q
- Assembly of moving / rotating parts.
q
- Mobility of locking and bolt connections.
Dimensions­Check­(according­to­relevant­assembly­drawings):
q
- Stage 1: platform assembly, including plywood layout.
q
- Stage 2: frame assembly.
q
- Stage 3: panel assembly (usually when unit is fully completed).
6.10.2 Assembly service provided by others
For the assembly service performed by others, it is their responsibility to check and
inspect each unit assembled.
The inspection must include a visual and a functional check of all components and a
check of the assembled parts in accordance with the relevant assembly drawings.
It is recommended that the Customer will follow a similar sign-off procedure, such
as the Safescreen Assembly Card. Alternatively, the Customer is to sign-off all of the
relevant assembly drawings at completion of each assembled unit.
Safescreen Assembly Card
Unit type: Unit No.:
Unit weight: Drawing No.:
Item By: Date: Checked: Date:
Frame assembly
Platform
assembly
Panel assembly
Notes: