SAFWAY Huennebeck MANTO G3, User Manual

Page: 7 / 224

7
Unless stated otherwise, all dimensions are given in mm.
MANTO®
1.4 About this user guide
This user guide contains important information regarding the assembly and use of
Hünnebeck MANTO formwork as well as safety procedures that are important for safe
use on site. This user guide is intended to serve as an aid to working effectively with
MANTO formwork. Read this user guide carefully prior to commencing work with the
MANTO formwork and save it for future reference.
This user guide is designed for commercial users with proper professional training. The
information and procedures described here comply with the laws and the occupational
health and safety regulations of Germany and Austria. Hünnebeck assumes no liability
in the event of deviations from the information and procedures described in the user
guide or in the event that the equipment is used outside of this area.
1.4.1 Warnings and notes
DANGER
Danger!
Danger indicates a hazardous situation that, if not avoided,
will cause death or serious injury.
WARNING
Warning!
Warning indicates a hazardous situation that, if not avoided,
can cause death or serious injury.
CAUTION
Caution!
Caution indicates a hazardous situation that, if not avoided, can cause minor or moder-
ate injury.
NOTE
Note!
Note indicates a hazard that can cause property damage.
This note indicates that an additional inspection is required.
This note shares practical experience with the user, e.g. how to perform a task more
easily or quickly.
This note indicates particularly important information, e.g. that a requirement has to be
fulfilled.
This symbol indicates that additional information from other documents is required.
These documents could be user guides or operating instructions for other products.
1.4.2 Instructions
Instructions are always identified with the word Step , e.g.
Step 1 Insert the locking bolt into the hole from the outside.
Step 2 Secure the pin with the spring cotter pin.