56
MANTO panels
Unless stated otherwise, all dimensions are given in mm.
4.4 MANTO panels G3 M
MANTO panels G3 M can be identified by the following characteristics:
• Centre profile(s) on all panels with tie positions (with smaller holes above and below
the tie hole, for the single-side operated ties);
• Long edge profiles without tie positions (some panels with tie position on the smaller
edge profile) and no reinforcement plates;
• Stiffeners between ribs and/or between ribs and smaller edge profiles.
• Holes Ø 22 mm in the edge profiles.
A - Panels; B - Extension panels.
2400
1200
900
600
3300
1200
2700
MANTO G4 Overview (1 : 30)
MANTO G4 Overview (1 : 30)
MANTO G4 Overview (1 : 30)
MANTO G4 Overview (1 : 30)
A
B
1200
900
600
For Safe Working Loads for MANTO panels, refer to page 217.
Summary of Contents for Huennebeck MANTO G3
Page 1: ...MANTO Large frame panel formwork User guide...
Page 9: ...9 Unless stated otherwise all dimensions are given in mm MANTO...
Page 61: ...61 Unless stated otherwise all dimensions are given in mm MANTO MANTO G3 M MANTO G3 M...
Page 219: ...219 Unless stated otherwise all dimensions are given in mm MANTO...
