SAFWAY Huennebeck MANTO G3, User Manual, Page: 34 / 224

34
Quick reference guide
Unless stated otherwise, all dimensions are given in mm.
*only rental **no longer produced
3.5 Struts and props
Component Part code Weight [kg]
1070
–
1300
1890
–
3285
N
2
N
1
MANTO Alignment Strut
The Alignment Strut is used to brace and
align formwork no higher than 3.90 m.
Each Alignment Strut must be ordered with
a MANTO Strut Connector or a MANTO
Strut Head.
SWL (N
1
) Min. extension: 27.00 kN.
SWL (N
1
) Max. extension: 8.00 kN.
SWL (N
1
) for other extensions can be inter-
polated.
SWL (N
2
): 7.50 kN
Refer to page 158.
565103 23.30
MANTO Strut Head
Allows MANTO panels to be braced with
the MANTO Alignment Strut.
Combined with the Adapter for Alignment
Struts, it can also be used with alignment
struts.
Combined with the Strut Adapter, it can
also be used with EUROPLUS new struts.
Refer to page 156 and page 158 for
information on SWL.
600035 4.33
275
Adapter for Alignment Struts
Used along with the MANTO Strut Head
or the MANTO Strut Connector to brace
MANTO formwork with the aid of alignment
struts.
Refer to page 160.
601733 1.31
730
MANTO Strut Connector
Combined with the Adapter for Alignment
Struts, it allows MANTO panels to be
braced with alignment struts.
Can also be used with the MANTO Align-
ment Strut.
It is also suitable for connecting a BKS
Strut up to a prop length of 8.00 m, in
which case an additional Strut Adapter is
required.
If fixed horizontally, an additional Bolt
D16x87 and Spring Pin 4 are required.
SWL: Refer to page 157.
565114 8.90