214
Storage and transport
Unless stated otherwise, all dimensions are given in mm.
20.4 Other components
All of the components should be stored in the proper transport equipment. Most of the
transport equipment can be moved with the Euro Trolley (code:607610) and transported
with the crane on site.
Always follow the directions in the Euro Trolley operating instructions.
Always use the latch (
A
, shown opened here) on the Euro Trolley to secure the trans-
port equipment.
A
20.4.1 Components < 1.00 m long and loose parts
Components < 1.00 m long and loose parts should be stored in the Euro Lattice Box
(code:548480). The Euro Lattice Box can be moved with the Euro Trolley.
20.4.2 Components > 1.00 m long
Components > 1,00 m long such as EUROPLUS
new
Props, PROTECTO Railing
Posts, etc. should be stored and transported on the Euro Stacking Frame 120/80
(code:553689). Always secure the components with straps or similar protection to
prevent them from slipping when being transported. The Euro Stacking Frame can be
moved with the Euro Trolley.
20.4.3 Uni mesh panels
Uni mesh panels should be stored and transported in the Uni Mesh Panel Rack
(code:605558). The Uni mesh panels are secured in the rack to prevent them from slip-
ping. The Uni Mesh Panel Rack can be moved with the Euro Trolley.
Step 1
Place the first Uni mesh panel in the Uni Mesh Panel Rack as shown in the illustration.
Summary of Contents for Huennebeck MANTO G3
Page 1: ...MANTO Large frame panel formwork User guide...
Page 9: ...9 Unless stated otherwise all dimensions are given in mm MANTO...
Page 61: ...61 Unless stated otherwise all dimensions are given in mm MANTO MANTO G3 M MANTO G3 M...
Page 219: ...219 Unless stated otherwise all dimensions are given in mm MANTO...
