174
Constructing working platforms
Unless stated otherwise, all dimensions are given in mm.
Securing to MANTO formwork
The pouring platform is equipped with a self-securing suspension that automatically
locks after the tension on the crane slings is released.
Crane slings
(loaded)
MANTO
panel
Crane slings
(unloaded)
Safety pin (locked)
MANTO
panel
WARNING
Risk of collapse!
The safety pin must be latched correctly.
Infills and Stopend
Extensions from 0.20 m to 1.00 m are created using on-site boards, toe boards and
2no. or 4no. KG Rail Extensions. The boards must overlap by 450 mm at both ends and
they have to be properly restrained (e.g. nailed).
The Platform Railing secures the end of the platform. It is fastened with the integrated
screws.
200 - 1000
Platform Railing
(code:587252)
KG Rail Extension
(code:498218) + Waler Bolt
D 20 (code:420000) +
Spring Pin 4 (code:173776)
Only used for length adjustments > 500 mm
WARNING
Risk of fall!
Use suitable safety equipment to install the platform until all edge protection around
the platform is complete. Extension boards overlapping the pouring platform pose a
tripping hazard. All tripping hazards should be eliminated by using suitable fillets.
Summary of Contents for Huennebeck MANTO G3
Page 1: ...MANTO Large frame panel formwork User guide...
Page 9: ...9 Unless stated otherwise all dimensions are given in mm MANTO...
Page 61: ...61 Unless stated otherwise all dimensions are given in mm MANTO MANTO G3 M MANTO G3 M...
Page 219: ...219 Unless stated otherwise all dimensions are given in mm MANTO...
