DOK451 rev.2
Page 9 of 26
4.2
USB installation
4.2.1
Installation of FTDI serial driver
To install the drivers for the FTDI serial driver under Windows, follow the instructions below:
Connect the USB-RS422 plug to a spare USB port on your PC.
shows how to connect the EVK to a
PC
If there is an available Internet connection, most Windows versions will silently connect to the Windows
Update website and install a suitable driver
In the event that no automatic installation takes place, please refer to the set-up guide from FTDI:
http://www.ftdichip.com/Support/Documents/InstallGuides.htm
Micro-D
P-USB
C-USB
Break-out
Figure 7: Connecting the EVK to a computer.
4.2.2
Verification and configuration of serial driver
Launch
Device Manager
. See
Control Panel
->
Hardware and Sound -> Devices and Printers
.
Verify that the driver installation has completed successfully:
