MorphoWave
TM
OEM
– Installation guide
Section 2 : General Description
2015_2000009096 V4
May 2017
This document and the information therein are the property of Morpho.
They must not be copied or communicated to a third party without the prior written authorization of Morpho
19
MorphoAccess Sigma Wave box opening
At the box opening of the MorphoAccess Sigma Wave, components shall be extracted
from the protection casing as depicted in the pictures below.
Extract the wall plate (which is not screwed to the terminal) and keep it separate until
the installation of the terminal is completed. The screwing of the product to the wall
plate is the last stage of the installation.
Figure 2: Box Opening
Components of the initial package
Figure 3: Box Content
1.
One (1) Terminal’s body
2.
One (1) Wall frame
3.
One (1) Battery
4.
One (1) Protection accessory (for WR products only, which usage is optional)
+
2
1
+
