Safran CORTEX CRT Quantum, User Manual

Page: 90 / 346

COMMAND RANGING & TELEMETRY UNIT CORTEX
CRT QUANTUM USER'S MANUAL
Ref. DTU 100042
Is.Rev. 5.17
Date: Dec.
03, 2021Sept. 30, 2021
© Safran Data Systems
This document is the property of
Safran Data Systems
.
It cannot be duplicated or distributed without expressed written consent.
Page 10
2.3.3.2.3. Configuration S100686: COMSAT 2U with EFC
The connection of the various signals to the user system is directly performed on the chassis rear panel as
described in 2.3.1.1. The computer connections (LAN, VGA) are directly available on the Industrial Computer
rear panel. The picture below lists and identifies the various connections to the computer ports, and the I/O
connectors of the Cortex CRT Quantum dedicated hardware.
Figure 18: Configuration S100686 Rear panel Connectors
Table 12: Configuration S100686 Rear panel Connectors
Connecto
r
Usage Connector Usage
1 Upper power supply unlock system 17 Uplink
– IF Alternate 1
2 Upper power supply AC input 18 Uplink
– IF Alternate 2
3 Lower power supply unlock system 19 Downlink
– IF Alternate 1
4 Lower power supply AC input 20 Downlink
– IF Alternate 2
5 Power supply Sound Alarm Button 21 Downlink
– IF Alternate 3
6 Mechanical Ground 22 Downlink
– Auxiliary 1
7 NIC1
– LAN
23 Downlink
– Auxiliary 2
8 NIC2
– LAN
24 Reference Frequency 2
9 VGA 25 IRIG In
10 USB 3.0 26 1-PPS In
11 Downlink
– RF / IF Nominal 1
27 AGC out 1
12 Downlink
– RF / IF Nominal 2
28 AGC out 2
13 Downlink
– RF / IF Nominal 3
29 AGC out 3
14 Reference Frequency 1 30 Video out 1
15 Uplink
– RF / IF Nominal 1
31 Video out 2
16 Uplink
– RF / IF Nominal 2
32 Reserved