background image

• 

Please put the facility in flat, stable and draughty place and avoid direct sunlight, high tem   

 

perature, humidity, dust and corrosive gas.

• 

If the product is installed on the wall, please make sure the wall’s load bearing is enough. To    

 

avoid falling and hurt people, install according to the illustration. 

• 

The LCD might get nebulized when the temperature variation is big, which will cause image    

 

distortion or decay of color. Wait for a moment (with power on) and the nebulization will  

 

 disappear.

• 

Do not block up the ventilation opening. Install the facility according to this handbook.

• 

Do not install the facility near any heat source such as radiator, heat register or stove.

• 

Do not use unqualified connecting lines, which might cause equipment failure.

• 

Do not press, stretch or heat the connecting line, which might cause damage to it.

• 

Please firmly grasp the plug of the connecting line when inserting and drawing. Pulling the    

 

connecting line emphatically might cause damage to it.

• 

Cut off power and the connecting line immediately and contact the after-sales service center   

 

if the facility or the connecting line is damaged for some reason. Continuing using without    

 

maintaining might cause smoking or off-flavor.

• 

Do not hang or shin on the facility, which might cause the facility to fall, upset or damaged    

 

and cause hurt to people. Be more careful when there are kids near the facility.

• 

Please cut off power for safety if not using the facility for a long time.

• 

Do not let the connecting line get squeezed by the wall or buckle, pull or twine the connect   

 

ing line overly.

• 

Make sure the power and the connecting line are cut off when moving the facility.

• 

Keep the facility from getting collided, which might cause equipment failure.

 

Please put the facility in flat, stable and draughty place and avoid direct sunlight, high tem 

 

perature, humidity, dust and corrosive gas.

• 

If the product is installed on the wall, please make sure the wall’s load bearing is enough. To    

 

avoid falling and hurt people, install according to the illustration. 

• 

The LCD might get nebulized when the temperature variation is big, which will cause image    

 

distortion or decay of color. Wait for a moment (with power on) and the nebulization will  

 

 disappear.

• 

Do not block up the ventilation opening. Install the facility according to this handbook.

• 

Do not install the facility near any heat source such as radiator, heat register or stove.

• 

Do not use unqualified connecting lines, which might cause equipment failure.

• 

Do not press, stretch or heat the connecting line, which might cause damage to it.

• 

Please firmly grasp the plug of the connecting line when inserting and drawing. Pulling the    

 

connecting line emphatically might cause damage to it.

• 

Cut off power and the connecting line immediately and contact the after-sales service center   

 

if the facility or the connecting line is damaged for some reason. Continuing using without    

 

maintaining might cause smoking or off-flavor.

• 

Do not hang or shin on the facility, which might cause the facility to fall, upset or damaged    

 

and cause hurt to people. Be more careful when there are kids near the facility.

• 

Please cut off power for safety if not using the facility for a long time.

• 

Do not let the connecting line get squeezed by the wall or buckle, pull or twine the connect   

 

ing line overly.

• 

Make sure the power and the connecting line are cut off when moving the facility.

• 

Keep the facility from getting collided, which might cause equipment failure.

Thank you for buying this CCTV Display. We wish you to enjoy this product in the next few years. The 

power dissipation is low no matter in viewing mode or standby mode, which means you make 

contribution to energy saving. We are introducing the function of the product here and we hope it 

can enrich your usage experience.

Full HD LCD panel with top-ranking video process chip, enhancing the effect of display of 

high-definition images. The functions such as low power dissipation, dust prevention, moisture 

protection and shock resistance effectively lengthen the service life of CCTV Display

• 

Supports 3D comb-filter and 3D de-interlace. 

• 

Low energy consumption, long service life.

• 

High contrast ratio and high luminance. 

• 

Automatically eliminates ghosting.

• 

Rapid response times, no trailing image.

• 

Thin and light.

• 

Support TVI & AHD &CVI 1080P camera display. 

Introduction to the product

Product appearance

Performance feature

Summary of Contents for SF-MNT24












Reviews: