Safire DVR6100V-H Series, User Manual

Page: 109 / 161

User Manual of DVR6100V-H Series DVR
108
Figure 9.15 UPnP
™
Settings Interface
3. Check checkbox to enable UPnP™.
4. Select the mapped type to Auto or Manual.
Task1: Auto
If you select Auto, the Port Mapping items are read-only, and the external ports are set by the router
automatically.
Steps:
1) Click Apply to save the settings.
2) You can click Refresh to get the latest status of the port mapping.
Figure 9.16 UPnP™ Settings Finished-Auto
Task2: Manual
If you select Manual as the mapping type, you can edit the external port on your demand by clicking
to activate the External Port Settings dialog box.
Steps:
1) Click to activate the External Port Settings dialog box. Configure the external port No. for
server port, http port, RTSP port and https port respectively.
Notes:

You can use the default port No., or change it according to actual requirements.

External Port indicates the port No. for port mapping in the router.

The value of the port No. should be between 1 and 65535 and the value must be different from
each other. If multiple devices are configured for the UPnP™ settings under the same router,
the value of the port No. for each device should be unique.