background image

Arc Flash

Full Body Harness  

ANSI Z359.11-2014 and ANSI/ASSE A10.32 

OSHA 1910.66, OSHA 1926.502, ASTM F887, NFPA 70E

This manual is intended to meet the manufacturer’s instructions as

required by ANSI Z359.11 and should be used as part

of an employee training program as required by OSHA.

WARNING

 

 

This product is part of a personal fall arrest, work positioning, or rescue system. The manufacturer’s 

instructions must be provided to users of this equipment. The user must follow the manufacturer’s instructions 

for each component of the system. The user must read and understand these instructions before using this 

equipment. Manufacturer’s instructions must be followed for proper use and maintenance of this equipment. 

Alterations to this product, misuse of this product, or failure to follow instructions may result in serious injury or 

death.

IMPORTANT

Questions regarding the use, care, or suitability of this equipment for your application? Contact Safewaze.

IMPORTANT

Record identification information before using this product. Identification information may be found on the 

equipment label (See Figure 15). This information should be recorded in the “Inspection Form” located at the 

back of this manual (p 16).

220-00068

User Manual

Summary of Contents for Arc Flash 019-1080





















Reviews: