User Manual
V1.7 2021 Copyright SafeWaze
Page 6
7.0 Making Connections
Snap Hooks and Carabiners must be ANSI Z359.12 compliant with a double locking
gate. Ensure all connections are compatible in size, shape and strength. Do not use
equipment that is not compatible. Ensure all connectors are fully closed and locked.
SafeWaze connectors (snap hooks and carabiners) are designed to be used only
as specified in each product’s user’s instructions. See Figure 3
for examples of
inappropriate connections. Do not connect snap hooks and carabiners:
• To a D-ring to which another connector is attached.
•
In a manner that would result in a load on the gate (with the exception of tie back
hooks).
•
In a false engagement, where features that protrude from the snap hook or
carabiner catch on the anchor, and without visual confirmation seems to be fully
engaged to the anchor point.
• To each other.
• By wrapping the web lifeline around an anchor and securing to lifeline except as
allowed for Tie Back models.
•
To any object which is shaped or sized in a way that the snap hook or carabiner will
not close and lock, or that roll-out could occur.
• In a manner that does not allow the connector to align properly while under load.
**
NOTE:
Large snap hooks must not be connected to objects which will result in a load on the gate if the hook twists
or rotates, unless the snap hook complies with ANSI Z359.1-2007 or ANSI Z359.12 and is equipped with a 3,600 lb
(16 kN) gate. Check the marking on your snap hook to verify its compatibility.
**NOTE:
Large throat snap hooks must not be connected to standard size D-rings or similar objects which
will result in a load on the gate if the hook or D-ring twists or rotates, unless the snap hook complies with
ANSI Z359.1-2007 or ANSI Z359.12 and is equipped with a 3,600 lb (16 kN) gate. Check the marking on
your snap hook to verify that it is appropriate for your application.
FIGURE 3 - INAPPROPRIATE CONNECTIONS
The SafeWaze Ladder Climb System is designed for use with an ANSI Z359.16 3/8”
Wire Rope Grab. The use of any other type of grab may be incompatible with the
system, and could create a serious safety hazard for the user. Do not use the
SafeWaze Ladder Climb System without first consulting with a Competent and/or
Qualified Person at the worksite for approval. For any other questions regarding
compatibility, please contact SafeWaze Technical Support
**NOTE:
ANSI Z359.1-2007 Safety Requirements for Personal Fall Arrest Systems, Subsystems and Components,
requires a Competent Person and/or a Qualified Person to “ensure that systems assembled from components and
subsystems made by different manufacturers meet the requirements of the Standard.”
