SV-LCD56/64/68 Quick Installation Guide
May 2007
SV-LCD56_64_68 QIG Ver.1.1
3
Control Box Rear Panel
Figure 7 shows the rear-panel components of the
control box. Component descriptions follow.
A POWER
—This receptacle accepts the 4-pin
Molex connector of the supplied power cable.
B AUDIO/VIDEO OUTPUT
—This attached cable
connects the monitor to the system, providing
power and audio/video signals to the monitor.
C MIRROR/NORMAL SWITCHES
—These
switches control the mirror/normal image setting
for cameras connected to CA2 and CA3.
D CA1, CA2, and CA3
—Each of these receptacles
accepts the connector of a camera cable and
supplies power to the camera. By default, the
view from the camera connected to CA1 is
displayed when the vehicle transmission is in
reverse gear.
Typical Installation
Monitor
1. Select a level mounting location for the monitor,
which can be mounted overhead or elsewhere in
the vehicle cabin (including on the floor or
console).
2. Affix the monitor bracket to the mounting surface
with the supplied monitor screw kit.
Installing the Monitor Bracket
3. Position the monitor in the monitor mounting
bracket, adjust the angle as necessary, and tighten
the handle screw.
Installing the Monitor in the Bracket
