50-000001 LCD Control Panel
The 50-0000001 LCD Control Panel provides advanced
functionality from a remote location.
Nominally, the LCD Control Panel displays the NVR’s name,
date, and time (as entered in the Web Configuration) in
addition to any active alarms, such as recording events or
errors.
Creating Events
Press the Event Button to create an event. The LCD displays
a confirmation and the Event status LED displays red until
the event has finished recording. Events can be configured
in the Firmware Settings page of the Web Configuration
interface.
Main Menu
Press the center navigation key to display the Main Menu.
There are four options available: System Details, System
Logs, Manual Offload, Remove SSD, and Help. Use the arrow
keys to move the cursor and to scroll up and down through
items. Press the center navigation key to confirm or enter a
command, and the
Esc
key to back out of a menu, or cancel.
System Details
Select System Details to display information about the
firmware installed on the NVR. Firmware Version is the only
available option.
Firmware Version
Select Firmware version to display the firmware version
currently installed on the NVR. This information may be
useful when speaking with Safety Vision Technical Support.
System Logs
Select System Logs to display a list of current and past
events or errors.
Event Logs
Select Event Logs to display the most recent recorded event
timestamps. Use the up and down navigation keys to scroll
through the list of events.
Error Logs
Select Error Logs to display the most recent errors. The
nature of the error and the time at which it occured are
displayed. Use the up and down navigation keys to scroll
through the list of errors.
System Logs are stored in the LCD Control Panel’s internal
memory. Disconnecting the LCD Control Panel from the NVR
will result in the loss of data. (This data is still recorded by the
NVR, but can no longer be displayed on the LCD.)
Manual Offload
Select the Manual Offload option to manually offload recorded
events to a USB flash drive inserted in the front of the NVR.
Press the center navigation key to select
To USB
. Use the
directional navigation keys to highlight the characters of the
offload password (as configured in the Change Password
configuration screen) and press the center navigation key to
enter them.
Once finished, highlight Done and press the center navigation
key to enter the password. Confirm event or continuous
recording. When the offload is taking place, the bottom LED
status light displays red. When the process it complete, the LED
reverts to displaying green.
Remove SSD
Select the Remove SSD option from the main menu to remove
the hard drive. Use the navigation key to highlight each
character of the password and press the center navigation key
to enter it.
Wait for the “Insert Storage Media” prompt appears
BEFORE removing the hard drive.
Help
Select the Help option to display a help message regarding
manual offloads.
10
ROADRECORDER
®
7006 NVR USER GUIDE
Summary of Contents for roadrecorder 7006 series
