background image

Important Notices 

Title: 

Observer™ 4816-NVR Hardware User Guide

Document Version:

 1

Revision:

 0

Safety Vision attempts to provide information contained 
in this manual based on the latest product information 
available at the time of publication.  However, because of 
Safety Vision’s policy of continual product improvement, 
Safety Vision reserves the right to amend the information in 
this document at any time without prior notice.

This material is confidential and the property of  
Safety Vision. It is shared with your company for the sole 
purpose of helping you with the operation of the described 
equipment.

Safety Vision makes no warranty of any kind with regard 
to this material, including, but not limited to, the implied 
warranties of merchantability and fitness for a particular 
purpose. Safety Vision shall not be liable for errors contained 
herein or for incidental or consequential damages in 
connection with the furnishing, performance, or use of this 
material.

Safety Vision expressly disclaims all responsibility and 
liability for the installation, use, performance, maintenance, 
and support of third-party products. Customers are advised 
to make their independent evaluation of such products.

No part of this document may be photocopied, reproduced, 
or translated to another language without the prior written 
consent of Safety Vision.

Safety Vision® is a registered trademark of Safety Vision, 
LLC. All other products or name brands mentioned in this 
document are trademarks of their respective owners.  
For more information about Safety Vision and its products, 
go to www.safetyvision.com or call 800-880-8855.

Summary of Contents for OBSERVER 4816-NVR

















Reviews: