Safety Vision OBSERVER 4116, Hardware User'S Manual

Page: 8 / 23

SD Card Insertion /Removal
Do not force the SD card into the slot upside down or
backwards.
Ensure the SD card’s write protection slider is in the
“unlocked” position.
Do not remove the SD card until the NVR is turned off.
1. Open the faceplate as described in the previous
procedure.
2. Open the SD card slot door from the left edge.
3. Insert an SD card into the SD card slot label-side up,
with the notch to the right, until it clicks in place.
To remove the SD card, press the SD card as far as it
will go in the slot, then allow it to “spring” out.
observer 4116 Hvr Hardware User GUide 6