ROADRECORDER® 9000 USER GUIDE
10
Launch the SV Windows Application
To access the NVR’s configuration menus, connect to the NVR and launch the SV Windows Application.
There are two methods for connecting to the NVR and launching the SV Windows Application:
1.
Using a keyboard, mouse and monitor –
(preferred method)
•
Monitor –
HDMI
•
Keyboard and mouse –
USB
If using this method, connect keyboard, mouse, and monitor to NVR, then launch the SV Windows application
(by clicking on
the SV Windows Application icon located in the window’s tray)
for NVR configuration menus.
2.
Using your PC and Windows
Remote Desktop Connection
Application –
(Ethernet cable required)
If using this method, connect the PC to the NVR’s Ethernet LAN 1 RJ45 port with a standard Ethernet cable.
(Ensure the NVR
and PC are receiving power and have started up.)
Launch the Windows Remote Desktop Connection application and enter the
following IP address:
192.168.0.100
.
Once you are connected to the
NVR, launch the SV Windows
application
(by clicking on the SV
Windows Application icon located
in the window’s tray)
for NVR
configuration menus.
