background image

56BA-AHD/70BA-AHD USER GUIDE 

Document Version:

 1

Revision:

 0

Safety Vision attempts to provide information contained in this 
manual based on the latest product information available at the time 
of publication. However, because of Safety Vision’s policy of continual 
product improvement, Safety Vision reserves the right to amend the 
information in this document at any time without prior notice.

This material is confidential and the property of Safety Vision. It is shared 
with your company for the sole purpose of helping you with the operation 
of the described equipment.

Safety Vision makes no warranty of any kind with regard to this material, 
including, but not limited to, the implied warranties of merchantability 
and fitness for a particular purpose. Safety Vision shall not be liable for 
errors contained herein or for incidental or consequential damages in 
connection with the furnishing, performance, or use of this material.

Safety Vision expressly disclaims all responsibility and liability for the 
installation, use, performance, maintenance, and support of third-party 
products. Customers are advised to make their independent evaluation of 
such products.

No part of this document may be photocopied, reproduced, or translated 
to another language without the prior written consent of Safety Vision.

Safety Vision

®

 is a registered trademark of Safety Vision, LLC. All other 

products or name brands mentioned in this document are trademarks of 
their respective owners. For more information about Safety Vision and its 
products, go to www.safetyvision.com or call 800-880-8855.

56BA-AHD/70BA-AHD USER GUIDE 

Summary of Contents for 56BA-AHD















Reviews: