43M USER GUIDE
8
Operation Instructions
When the ignition key is in the ACC or ON position, power is
supplied to the monitor and the status LED light will display solid
red. Press the CAM Select button or shift the vehicle into reverse
gear to activate the monitor.
Cleaning And General Maintenance
• If your vehicle has been parked in direct sunlight resulting in
a considerable rise in temperatures inside the vehicle, allow
the unit to cool off before operating.
• Clean the unit with a slightly damp soft cloth. Use a mild
household detergent.
• Never use strong solvents such as thinner or benzene as
they might damage the finish of the unit.
Cleaning
Unplug or power off before cleaning. Do not use liquid cleaners
or aerosol cleaners. Use a damp cloth for cleaning.
Ventilation
Holes in the cabinet and of the back or bottom are provided
for ventilation, and to ensure reliable operation of the monitor
equipment by protecting from overheating. These holes must
not be blocked or covered.
Object and Liquid Entry
Never push objects of any kind through monitor equipment
holes as they may touch dangerous voltage points or short-out
parts that could result in a fire or electric shock. Never spill liquid
of any kind on the monitor.
Servicing
Do not attempt to service this system by yourself as opening or
removing covers may expose you to dangerous voltage or other
hazards. Refer servicing to qualified service personnel.
Summary of Contents for 43M
Page 1: ...43M USER GUIDE...
