Safety Link Freecall 1800 813 617
Visit: www.safetylink.org.au
Email: [email protected]
CD 0030
Issue 1
9. Charging the GO Trek
1. Place the device on the charging platform (provided).
2. Ensure the platform is connected to the power
cord and the mains power is turned on.
3. The device must be placed with
the speaker facing upwards in
order to charge.
4. The platform will illuminate
blue to indicate charging has
commenced. Charging should
take approximately 4-6 hours.
5. During the charging event,
the pendant will radiate heat,
this is part of the normal operation.
6. If you are travelling or away from
home, always take the charger with you.
10. Important Notes
1. Due to external factors, it is possible that in exceptional circumstances the
GO Trek may not operate as expected. Such factors include, but are not
limited to; network coverage, radio interference, or reduced battery capacity
due to not being charged by the client. Safety Link will not be held liable
for consequences caused by factors outside of its control.
2. If you are taking GO Trek on an aircraft, or returning the device
by mail, the ‘hibernation’ mode must be enabled. To enable this
mode, press and hold either button for 10 seconds, when
successful, the voice message will announce: “Hibernation enabled.
All functions suspended until button press or placed on the charger.”
3. GO Trek is intended for use within Australia only.
