Ref: Crimping_Tool_18v_Handbook
Page 12 of 16
Doc ID: MKT-567 Version: 2.0
EXAMPLE: LAYOUT OF LIFELINE SYSTEM
All working at heights safety procedures must be complied with when installing SafetyLink height safety systems.
For more information refer to your state or territories current legislation, regulations, policies and codes of
practices. Horizontal height safety lifelines must only be installed and used by competent people with relevant
current height safety qualifications.
SAFETYLINK HEIGHT SAFETY SYSTEMS MUST ONLY BE INSTALLED AS PER OUR INSTALLATION GUIDES, TO
STRUCTURES AS SPECIFIED IN THE INSTALLATION MANUAL FOR EACH PRODUCT. SHOULD ANY DOUBT EXIST IN
REGARDS TO THE STRUCTURES INTEGRITY AN ENGINEER SHOULD BE CONSULTED
.
FrogLine
Intermediate Unit
FrogLine End Unit and
Tensioner with Tension indicator
FrogLine
Corner Unit
FrogLine Intermediate Unit
WARNING:
Surface Mounted Anchors
should be positioned
two 2 metres from the edge
on Kliplok roofs.
C
abl
e
MAXIMUM SPACE BETWEEN
INTERMEDIATE ASSEMBLY IS
TEN (10) METRES
FrogLine End Unit and Termination
Th
is
is
a
gu
id
e
on
ly
FrogLine Intermediate Unit
