page 18
111v Tsarigradsko Shose blvd, 1784 Sofia, Bulgaria | [email protected] | www.safetyeng.eu
The following instructions are provided as general recommendation in order to prolong the
life of the device; they are not obligatory.
•
Cleaning (device only)
: Clean the exterior of the Self Belay device with a damp cloth
with small amount of mild detergent. Do not submerge the device in water! Let the
device dry completely before next use.
•
Cleaning, (Self Belay key and quicklink
): These components are made from stainless
steel and are safe to wash. Use mild detergent and wash well. Let the components dry
naturally before use.
•
Disinfection
. Use pure ethanol only (at least 80% proof). Spray or pour small amount
on a dry cloth and clean thoroughly. If using spray, make sure not to spray directly
inside the device; always apply the disinfectant to a cloth and clean thoroughly. Let the
components dry before subsequent use.
•
Lubrication
: Small amount of general-purpose, low viscosity silicone oil or graphite-
based dry lubricant in spray form can be used.
•
Storage
: Keep in dry, well-ventillated place away from direct sunlight, extreme
temperatures, and corrosive or aggressive substances.
11.2. General care
