Page 12
PRODUCT MANUAL
One-Touch Voice Recorder Pen : SB-P640
www.SafetyBasement.com Phone: 877-345-2336 Fax: 888-236-2524
PHOTO
This unit can take still photos. Proceed as follows:
1. Turn unit on to standby mode (steady red) (see instructions above).
2 Press the mode button twice, slowly. On the second press the indicator light will change to
STEADY RED/BLUE. You are now in PHOTO STANDBY MODE.
3. Press and release ON/OFF button. REd/Blue light will blink and return to RED/BLUE
standby. You just took a picture. Repeat as necessary
MOTION ACTIVATED RECORD-
VERY IMPORTANT:
To get to MOTION DETECTION MODE, you MUST
plug in power cable to port on DVR and the other part to wall or computer (or car charger).
Meaning is should be plugged in!
1. Plug in Charging USB cable.
2 Turn unit on to STANDBY MODE (steady GREEN, when plugged in to power)
3. Press MODE button twice until you are at a BLUE/RED light. You are now in MOTION
DETECTION STANDBY MODE
4. Press ON/OFF button. Light will start blinking. You are now recording in motion detection
mode.
5. To stop recording press ON/OFF button to return to standby. Repeat as necessary.
