For more help and resources, call 1-800-544-1108 or visit www.safety1st.com
9
8
Using Your Monitor
Using Your Monitor
Parent Unit (Video/Receiver):
VOLUME CONTROL BUTTON
Volume Control Button
is on the right side of
Parent Unit. To adjust
volume, press up (+) or
down (-). Volume bars
will display on screen.
No bars means Parent
Unit is on mute.
SOUND LIGHTS (5 LEDs)
As baby’s voice gets louder, the sound lights will illuminate from 1 light up to
5 lights. Low sound is one LED illuminated and rises incrementally as baby’s
noise level increases until all 5 LEDs are illuminated.
ZOOM CONTROL BUTTON (1x, 2x, 4x)
Zoom Control Button is the upper left button on the side of Parent Unit. There are 3 levels:
Zoom 1x (normal view), 2x and 4x. To adjust zoom view , press up (+) or down (-). Zoom
status will display on screen. If no zoom icon appears on screen, press once to check current
zoom status and press twice to change zoom status.
BRIGHTNESS CONTROL BUTTON
Brightness Control Button is the upper right button
on the side of Parent Unit. To adjust brightness level,
press up (+) or down (-). Brightness level icons will
display on screen. If no brightness icon appears on
screen, press once to check current brightness status
and press again to change brightness status.
DAY/NIGHT AUTO VIEWING
Day/Night Auto Viewing lets you see your baby in a darkened room. The video display
during this time is in black and white. For best view of your baby in a dark room, increase
brightness control until desired brightness is achieved. For best visibility, Camera should
be 3 feet away from your baby.
DO NOT PLACE UNITS IN CRIB OR MOUNT ON CRIB.
KEEP OUT OF REACH OF CHILDREN.
AC ADAPTER
The Parent Unit operates on household electricity with the AC Adapter and
the Audio Parent Unit will operate on household electricity with the AC Adapter
or with rechargeable battery pack (included). The Baby Unit operates on
household electricity with the AC Adapter or with 4 AA batteries (not included).
The Parent Unit will automatically convert to AC operation when used with the
AC Adapter. It is not necessary to remove the battery during AC operation.
The Audio Parent Unit will automatically switch back to battery power when
plug is disconnected from the AC Adapter.
The AC Adapter should be used whenever possible on the Audio Parent Unit to
save battery life. This is done by inserting the AC Adapter into the AC Adapter
Jack. Then simply plug the AC Adapter into a nearby standard household outlet
(120V AC outlet). The AC Adapters may become slightly warm to the touch
during operation. This is normal.
This AC Adapter is a low voltage power source which allows you to use your
household electricity to run the Baby and Parent Units when it connects to the
AC Adapter Jack in the Parent Unit and in the Baby Unit, and plugs into any
standard electrical outlet in your home.
To remove AC adapter from the outlet, firmly grasp the adapter "brick." DO NOT
pull on the cord, as this could damage it.
CAUTION: This AC Adapter was made with a specific design for the Safety 1st Monitor. It cannot
be used with any other appliance, and never use a different type of adapter with this Monitor.