For more help and resources, call 1-800-544-1108 or visit www.safety1st.com
13
12
Using Your Monitor
Using Your Monitor
POWER INDICATOR
The power indicator is a green LED that indicates that the
unit is on and functioning.
ADDING ADDITIONAL CAMERAS
Note: This product can accept up to 4 cameras. To order an additional camera
(#MO140), please contact our Customer Service Department by phone at
1-800-544-1108 or visit www.safety1st.com
• Plug the AC adapter into AC jack on the Camera and the other end into
a standard wall outlet.
CAMERA BUTTON
Touch the Add Camera button. From here, you can: Disable a previously
added camera, reactivate a previously added camera, add a new camera and
program a camera.
TO ADD A CAMERA
Tap the next available camera button (+) and follow the prompts on screen:
Press pairing button on new camera to add, linking prompts appear on
screen for a few seconds while camera and Parent Unit link up. Camera image
becomes visible on screen and camera icon changes to green. Press “Check”
button to confirm and return to prior screen.
• USE WITH MULTIPLE CAMERAS INSTALLED
Press the Quick View Button to fast-forward between Cameras if in
Auto-Scan
mode.
• HOW TO PAUSE AUTO-SCAN
If more than one Camera is in use, double-click the Quick View Button on a
chosen camera view. Auto-scanning will pause for 1 - 5 minutes. The status
bar, camera battery icon and sound lights will correspond to the camera
in
view.
• POWERSAVER MODE
Press and hold Quick View Button to shut-off the video screen. The Parent
Unit will go into Powersaver Mode. Press again to bring back full video.
TO DISABLE/REACTIVATE A PREVIOUSLY ADDED CAMERA
Toggle between the “green icon” and “red icon” button to
activate/deactivate the highlighted camera. Video screen fades
to blue when camera is deactivated. Note: Deactivating a camera
does not affect programmed settings.
AUTO-SCAN ON/OFF TOGGLE BUTTON
Auto-Scan Mode allows monitor to
automatically cycle through all cameras
that are currently programmed and active. Touch the Auto-Scan Toggle button.
Toggle between the Auto-Scan button (green icon) and Manual Scan button
(red icon) to activate/deactivate the auto-scan feature. Press “Check”
button to confirm and return to prior screen. Adjusted status appears in
status bar.
NIGHTLIGHT
Tap Nightlight Button on front of Camera to turn On/Off.
Camera (Baby Unit):
Camera (Baby Unit):
(continued)