Body Pillow (On Select Models)
To remove,
pull buckle through the slot in
bottom pillow and slide the pillow out from
behind the harness straps.
Head Pillow (On Select Models)
Loosen the harness straps.
To remove,
pull it up from behind the
body pillow.
You must use the body pillow in order to
use the head pillow.
4
3
Accessory Use
Harness Covers (On Select Models)
Harness covers help provide comfort to
the neck.
If harness covers will not allow proper
positioning of the chest clip or interfere
with getting a tight enough fit for a smaller
baby, remove and do not use.
Store until child is large enough to use
these harness covers while maintaining a
properly fitting harness.
To remove harness covers,
pull the
fastening strips apart and remove harness
covers.
Lower Infant Insert
(On Select Models)
To remove,
loosen the harness straps
and unbuckle the buckle and chest clip.
Unthread the harness straps from the
splitter plate. Pull the harness straps
through the shoulder harness slots. Push
the buckle, chest clip, and harness strap
through the slots in lower infant insert.
Remove buckle by inserting the buckle’s metal retainer up through the
car seat and pad.
Remove the insert.
Replace the buckle.
Rethread the harness straps and attach them to the splitter plate.
Reverse to install the infant insert.
Upper Infant Insert
(On Select Models)
To remove,
loosen the harness straps.
Unthread the harness straps from the
splitter plate. Pull the harness straps
through the shoulder harness slots and
remove the insert. Rethread the harness
straps and attach them to the splitter plate.
Reverse to install the infant insert.
Make sure the slots in the insert are aligned with the shoulder
harness slots in the shell that are in use.
PUSH
PUSH
Infant Insert (On Select Models)
The infant insert
must not
cover your
child’s face in any way.
Remove the infant insert when your child’s
head has reached the top inside part of the
insert.