continued on next page
LATCH: Lower Anchor Install
34
33
Before you begin installing the car seat
into your vehicle, did you check:
Remove Lower Anchor Belt
from Storage Attachments
1
Your child’s weight and height? See page 4.
Your child’s fit? See page 6.
Do you need to make adjustments to the
harness strap position or the buckle position?
Place Base
Rear-Facing
in Back Seat
Center the base between the
vehicle’s lower anchors in the chosen
seating position.
Attach Lower Anchor
Hooks to Vehicle’s Lower
Anchors in Seat Bight
Review your vehicle owner’s manual
for LATCH: lower anchor locations
and lower anchor belt use.
Fasten one hook to one vehicle lower
anchor bar.
Then repeat for the second hook on
the other side of the base.
T
i
ghten Belt
Place your hand in the base.
Firmly push the base down and back
towards the vehicle seat back while
pulling the free end of the belt
parallel with the
Rear-Facing
Belt
Path
.
Route Lower Anchor Belt
Through Base Belt Path
The adjuster can be on either side of
the car seat.
Do not twist belt.
2
3
4
5
LATCH: Lower Anchor Belt Install
1
2
