40
Vehicle Belt Installation
WARNINGS:
D
o not use the lower
anchor belt along with the vehicle
lap or lap/shoulder belt. Secure
lower anchor hooks to storage
attachments as shown when install-
ing with vehicle belts.
Store the tether hook when used
rear facing. Attach the tether hook to
storage attachment as shown and
gently tighten to remove slack.
Check vehicle belt before each use.
Use only if the belt can be tightened
properly and locked securely in
place.
Failure to follow these warnings can
result in serious injury or death.
39
continued on next page
1.
Recline the Child
Restraint
Pull out on recline handle and
push top of child restraint back.
3.
Check if Your Vehicle
Belts Will Work With
This Child Restraint
This is very important because
not all vehicle belts will work
with child restraints.
Review pages 29-31 and your
vehicle owner’s manual to
determine what kind of vehicle
belt you have and how to lock a
child restraint in place.
2.
Place Child Restraint
Rear Facing in Back
Seat
For children who cannot sit up
unassisted,
the level line on shell
MUST
be parallel with the ground.
For children who can sit up
unassisted,
you may rotate the
child restraint to be more upright
in position 2.
