For more help and resources, call 1-800-544-1108 or visit www.safety1st.com
9
8
• Place Baby Unit at least 3 feet (0.9 m) away from your baby.
• To reduce audio feedback, position both Parent and Baby Unit far enough away
from each other to avoid interference. Turning the volume down will help.
• This monitor has indoor/outdoor range. During use of the monitor, if the sound
quality deteriorates, you may be reaching the limits of the monitor’s range.
If this happens, you will need to move Parent Unit closer to Baby Unit.
You can verify by checking the Link Indicator icon displayed in the data display,
(See page 10.)
• Adjust the volume to a comfortable level for your environment.
• Day/Night Auto Viewing lets you see the baby in a darkened room. The video
display during this time is in black and white. For best view of your baby in a
dark room, increase brightness control until desired brightness is achieved.
• Baby Unit can also be wall mounted. (See page 11.)
More Features, More Functions
Once you’ve set up your monitor and powered On, it’s time to learn about the
innovative parent convenience features your monitor has to offer. Keep reading to
explore these many features:
• Zoom
• Video On/Off (to conserve battery life)
• Brightness Control
• Day/Night Auto Viewing
Quick Start Guide
Using Your Monitor
DO NOT PLACE UNITS IN CRIB OR MOUNT ON CRIB.
KEEP OUT OF REACH OF CHILDREN.
AC ADAPTER
The Parent Unit operates on household electricity with the AC Adapter or with
rechargeable battery pack (included). The Baby Unit operates on household
electricity with the AC Adapter or with 4 AA batteries (not included). The Parent
Unit will automatically convert to AC operation when used with the AC Adapter.
It is not necessary to remove the battery during AC operation. The Parent Unit
will automatically switch back to battery power when plug is disconnected from
the AC Adapter.
The AC Adapter should be used whenever possible on the Parent Unit to save
battery life. This is done by inserting the AC Adapter into the AC Adapter Jack.
Then simply plug the AC Adapter into a nearby standard household outlet (120V
AC outlet). The AC Adapters may become slightly warm to the touch during
operation. This is normal.
This AC Adapter is a low voltage power source which allows you to use your
household electricity to run the Baby and Parent Units when it connects to the
AC Adapter Jack in the Parent Unit and in the Baby Unit, and plugs into any
standard electrical outlet in your home.
To remove AC adapter from the outlet, firmly grasp the adapter "brick."
DO NOT pull on the cord, as this could damage it.
CAUTION: This AC Adapter was made with a specific design for the Safety 1st Monitor.
It cannot be used with any other appliance, and never use a different type of adapter
with this Monitor.
Parent Unit (Video/Receiver):
VOLUME CONTROL BUTTON
Volume Control Button is on the right
side of Parent Unit. To adjust volume,
press up (+) or down (-). Volume bars
will display on screen. No bars means
Parent Unit is on mute.
SOUND LIGHTS (5 LEDs)
As baby’s voice gets louder, the sound lights will illuminate from 1 light up to 5
lights. Low sound is one LED illuminated and rises incrementally as baby’s noise
level increases until all 5 LEDs are illuminated.