Safety 1st EverFit ARB with Comfort Cool Manual Download Page 42

Replacement Parts List 

78

Warranty

77

1. If the child restraint buckle or harness release lever sticks or 
you cannot get the straps tight enough around child:

DO NOT LUBRICATE.

 Check around lever and retractor for dropped 

food, sticky spilled drinks, dirt, leaves, etc. Clean with warm water 
and/or remove object with tweezers. If you cannot get the harness to 
adjust and remain tight with the buckle securely locked, do not use 
the child restraint.

2. If your harness twists:

Straighten the harness each time you put your child in the child 
restraint to help prevent twisting. Lock the buckle and tighten harness 
so it will be ready for next use.

Troubleshooting

Dorel Juvenile Group, Inc. (DJG) warrants this product to the 
original retail purchaser as follows: 

This product is warranted against defective materials or workmanship 
for one year from the date of original purchase. 

An original receipt is 

required to validate your warranty.

 DJG will, at its option, provide 

replacement parts or replace this product. DJG reserves the right to 
substitute if the part or model has been discontinued.

To make a claim under this warranty, please contact our Consumer Care 
Department by phone: 1-800-544-1108; text: 1-812-652-2525; or 
chat with us: www.safety1st.com.

Our hours of operation are from 8:00 a.m. to 6:00 p.m. EST Monday 
through Thursday and from 8:00 a.m. to 4:30 p.m. on Friday.

Proof of purchase is required and shipping charges are the 
responsibility of the consumer.

Warranty Limitations: 

This warranty does not include damages which 

arise from misuse or abuse of this product. 

Limitation of Damages: 

The warranty and remedies as set forth are 

exclusive and in lieu of all others, oral or written, expressed or implied. 
In no event will DJG or the dealer selling this product be liable to you for 
any damages, including incidental or consequential damages, arising 
out of the use or inability to use this product. 

If requested color is not available, 

similar color will be substituted. 

Applicable tax and shipping & 

handling will also be added.

For parts availability and questions,

 

please call: 1-800-544-1108; text: 1-812-652-2525; 

or chat with us: www.safety1st.com.

If you already know which parts you need,

 

you may complete your order with a credit card 

by calling us at 1-800-544-1108. 

We accept Visa or MasterCard.

Hours of Operation:

M-TH from 8:00 AM to 6:00 PM EST

FRI from 8:00 AM to 4:30 PM EST

Anti-Rebound Bar

Buckle Assembly

Seat Pad Set

Removable Cup Holder

Chest Clip 

Tether

UAS Belt

Instructions 

Locking Clip

Summary of Contents for EverFit ARB with Comfort Cool











































Reviews: