Forwar
d-Facing Use:
22-40 lbs.
(10.1-18 kg),
34-43” (85.1-110 cm),
Ov
er 1 y
ear of age
.
5
Place one knee in the child
restraint and push down
firmly while pulling up on
the loop to tighten belt.
With knee still in child
restraint, attach hook to
anchor in vehicle. Push
down firmly and tighten
top anchorage strap.
To adjust top anchorage
strap: See “Adjusting Top
Anchorage Strap” section.
6
With weakest hand at
belt path, tilt and push
the child restraint
forward and back and
side to side. If the seat
belts do not loosen, your
child restraint should be
secure.
NOTE:
Some “play”
from front to back or an
inch or two from side to
side is acceptable.
If the child restraint does not remain tight, do not use
the child restraint in this seating location with this
LATCH system.
7
WARNING
!
Using this child restraint in any vehicle
seat where the LATCH belt cannot be
tightened securely and properly or where
it can be loosened by pulling on it, can
result in serious injury or death.
To remove LATCH:
Remove child from child
restraint. Press down
firmly on adjuster side of
child restraint and press
release button to release
tension. Unhook LATCH
from bar by squeezing
spring lever and twist
hook.
9
After checking for hot
seat and buckles, place
child in child restraint.
See “Securing Your Child
in the Child Restraint”
section.
8
37
36
4
Fasten one LATCH belt
hook to the anchor in the
vehicle seat located in the
vehicle seat bight. Repeat
for other side of child
restraint. See your vehicle
owner’s manual for
locations and more
information.
4358-3340D Elite_Lux 3/13/06 3:08 PM Page 39
