PUSH
1
2
Pull Vehicle Belt Across
Child Restraint
Thread vehicle seat belt
under
pad in front of buckle
strap to the opposite side.
Buckle vehicle belt.
Do not place vehicle belt
over child’s legs.
3.
NOTE:
The buckle
MUST
be in the 1st or 2nd buckle strap
slots when rear-facing. Any slot can be used for
forward-facing.
Thread Vehicle Belt
Thread the vehicle lap/
shoulder belt combination
through the rear-facing belt
slot.
2.
Tighten Vehicle Belt
Push down firmly on the
child restraint and while
pulling on the vehicle
shoulder belt to tighten.
4.
Locate Locking Clip
Location
Grasp both vehicle belts
together just behind the
latch plate and unbuckle.
NOTE:
If the latch plate
ends up just at the belt path
opening, grasp the vehicle
belts on the opposite side
of the child restraint, as
close to the latch plate as
possible.
5.
Attach Locking Clip
Thread both portions of the
vehicle belt onto the locking
clip, as close to the latch
plate as possible.
6.
Position Locking Clip
Position locking clip about
1 in. (2.5 cm) from vehicle
belt’s latch plate.
7.
Summary of Contents for advance 70 air plus
Page 1: ......