Secure Sound Lights:
9
.
The 5 sound lights on the Parent’s Unit indicate the
sound level of the baby. The more noise your baby
makes, the more sound lights will illuminate
(Figure E).
Audio Power On:
10
.
The power on indicator on the Parent’s Unit lights
green
(Figure E).
CAUTION:
Test the Parent’s Unit and Baby’s Unit before
each use. It is essential to check reception regularly.
7
To Test the Reception:
12
.
Place the Baby’s Unit at least 20’ (6 m) away from Parent’s Unit. Have an adult speak
into the Baby’s Unit at various levels (soft to loud) while another adult checks the
Parent’s Unit for the proper sound and reception. Try the Parent’s Unit in every
location that it will be used. It is best to follow these guidelines for good reception:
E
Sound
Lights
Green - Power On
LCD Display:
11
.
The LCD will constantly display the temperature of
your baby’s room
(Figure F).
The Soft Glow and digital
temperature display have been designed to work even
when audio is powered off.
NOTE:
Recommended range: 16°C to 20°C.
Operating Your Glow & Go Monitoring System
Baby’s Room
Temperature
F
Guidelines for Good Reception:
• Place your Baby’s Unit 4 to 6’ (1.5 to 2 m) away from the baby.
• Adjust the volume to a comfortable level for your environment.
• Use the Parent’s Unit far enough away from the Baby’s Unit so as not to get feedback.
• During use of the monitor, if the sound quality deteriorates you may be reaching the limits of
the monitor’s range. If this happens, you will need to move the Parent’s Unit in closer
proximity to the Baby’s Unit.
• If you have difficulty obtaining good sound quality, please refer to the Troubleshooting
section at the end of these instructions.
NOTE:
It is possible for the Parent’s Unit to pick up sounds or display interference from
other signal producing devices which broadcast in the 49 MHz frequency range. To
minimize this potential problem, two independent channels have been provided. If you
experience interference while using one channel setting, simply switch the Parent’s Unit
and Baby’s Unit to the other channel. Selecting a channel is usually a one-time adjustment.
If interference persists on all channels, please refer to the Troubleshooting section at the
end of these instructions.
CAUTION:
To protect your privacy, always turn the Baby’s Unit off when not in use. Always
remember that you are using public airwaves. Sound may be broadcast to other receiving
devices. Conversations, even from rooms nearby, may be broadcast.