1
Protect Adult Chair
G
:
Place chair topper on adult
seat
(Figure 1a)
.
Place seat on chair, over
chair topper
(Figure 1b)
.
To Use
1a
1b
3
Booster and Tray:
Clean before first use and after each use. Wipe with soft cloth and
warm soapy water. Use only mild non-abrasive soap. Both trays are
dishwasher safe (top rack only).
3
Restraint System
D
:
Position your child in booster seat. Place
restraint straps between legs and buckle
into position
(Figure 3a)
. Adjust restraint
straps for proper fit
(Figure 3b)
.
4
Attach Tray
A
B
J
:
Slide tray into slots on either side of
seat until it clicks into place. Pull on tray
to ensure that it is completely engaged
(Figure 4a)
.
Insert tray:
Align on main tray for use.
To remove tray:
Depress tray releases
on both sides of tray and pull away from
seat
(Figure 4b)
.
WARNING:
The tray is not a restraint device.
ALWAYS
use restraint straps to
secure child to booster seat.
3a
3b
To Clean
2a
2
Chair Straps
I
:
Pass the bottom chair strap completely
under base of chair and secure buckle
(Figure 2a)
. Tighten chair strap for
security.
Pass rear chair strap around back of
chair and secure buckle
(Figure 2b)
.
Tighten chair strap for security.
2b
•
•
•
•
•
WARNING:
ALWAYS
use both sets of chair straps to
completely secure booster to the chair.
If chair is cushioned and cushion cannot
be removed,
BE CERTAIN
that the
bottom chair strap is fastened snugly
after putting child in seat.
Make sure all pieces are assembled
correctly. Test for proper assembly
before placing child in seat.
ALWAYS
secure child in booster seat
using restraint straps.
ALWAYS
ensure
that
all
chair
protector
pads
are
located
completely
on the adult
chair
surface.
4a
4b