www.
Saf
e
trust
.com
Quick Start Guide
Safe
Login
Se
lect the Identity System, complete the location
and description. Then calibrate the S
L
BRE. Once
complete save the profile.
If the profile was successfully saved the new
description will be loaded with a unique serial number
assigned.
Open the SafeAccess APP and select Admin
Installer when within range of S
L
BRE. If the Amin
Installer option is not visible, go back to the
SafeAccess Portal and add that role. Once open
highlight S
L
BRE and select configure.
Open the Wallet and select the credential registered to
the system. The LED should be green if within range
or yellow if on the fringe of the pattern. If the LED is
not illuminated the credential
may not
be
on the same
system as the
USB Dongle
.
Login or Logout by presenting your phone within
the range preset during account set up in the
Credential Manager. Within the APP Settings
more or less sensitivity can be adjusted under Tap
in or Tap Out.
C
OMPLIANCE WITH FCC RULES AND REGULATIONS
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and if not used in accordance with the instructions, may
cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, the user is encouraged to try to correct the interference by one or more of the
following measures:
* Increase or decrease the separation between the equipment and receiver.
* Consult the dealer or an experienced remote control/ TV technician for help.
This equipment has been verified to comply with the limits for a Class B computing device, pursuant to FCC Rules. The user is
cautioned that changes and modifications made to the equipment without the approval of manufacturer could void the user's
authority to operate this equipment.
FCC Authorization Label
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1.
This device may not cause harmful interference.
2 This device must accept any interference received, including interference that may cause undesired
operation.
Responsible Party:
Safetrust, Inc.
8112 Mill Creek Rd
Fremont, CA. 94539 USA
FCC ID: GC823502
IC: 23133-SL100
IC Statement
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two
conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference
that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence.
L’exploitation est autorisée aux deux conditions suivantes: (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de
l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le
fonctionnement.
RF Exposure
The antenna (or antennas) must be installed so as to maintain at all times a distance minimum of at least 20 cm between the
radiation source (antenna) and any individual. This device may not be installed or used in conjunction with any other antenna
or transmitter.
l’exposition aux RF
L’antenne (ou les antennes) doit tre install e de fa on maintenir tout instant une distance minimum de au moins 20 cm entre la
source de radiation (l’antenne) et toute personne physique.
