Assembly Instructions - Safespace Hi-Lo
4
Lift the
top corner mounting bracket
up and tighten the nut on the threaded bar
downwards to create tension. Tighten the nut to a distance of 80-90mm away from
the bracket.
Repeat on all 4 corners.
Make sure all the zips of the doors and windows of the Safespace are closed.
Then begin to wrap the velcro straps around the vertical bars, at first with only a
small amount of tension. Thread the back of the velcro around the pole, thread it
through the chrome buckle. Then fold it back on itself to hold and tension the straps
more firmly.
The door and window zips need to open and close freely with no ‘straining’. Check
this, and if there is straining loosen the tension off slightly till the zips run freely.
Once you are satisfied the tension and positioning is correct, zip up all the corner
pockets.
7
Assembling the Hi-Lo
Place the
foam pad
onto the hi-lo bed base
and lift the Safespace compartment on.
Ensure the straps on all four sides hang
freely.
This requires two people.
8
The
toe-stubbing foam
can now be
positioned beneath the flaps on all four sides.
