Safesight SC9003 Back up camera system
www.qualitymobilevideo.com
Page 15
6.
Extension cable
Black bare wire
This is the 12 volt negative
power connection for the
camera. This will connect to
the same location you get
power from.
7.
Extension cable
Yellow male RCA Cable
Connects to the yellow female
RCA cable #8.
8.
Monitor harness
Yellow female RCA Cable
Connects to the yellow male
RCA cable #7.
9.
Monitor harness
Yellow male RCA Cable
This can be left unplugged.
This is the 2
nd
video input for
another camera or other
source.
10.
Monitor harness
Red
Po 12 volts – connect
this to the fuse box or other
positive circuit of the vehicle
that switches on with the key.
This connects to the same
location as #5
11.
Monitor harness
Black
Negative – 12 volts – connect
this to the ground of the
vehicle. This connects to the
same location as #6
12.
Monitor harness
Green
Po 12 volt trigger – this
connects to the positive side of
the reverse light. This triggers
the monitor to turn on in
reverse.
Note: The extension cable can only be used one way, make sure when running cable
in the vehicle you place the end with two connectors at the camera.
